本公司生产的耐火型动力电缆为额定电压0.6/1KV铜芯电缆，还可以生产低烟无卤耐火动力电缆、高阻燃隔氧层耐火动力电缆，其耐火性能符合GB/T12666.6《电线电缆耐火特性试验方法》。
耐火系列动力电缆的整体性能优良可靠。
Cable conductor long term allowed working temperature to: fluorine plastic outer sheath is 200 ℃, PVC outer sheath is 105 ℃, silicon rubber outer sheath is 180 ℃.
This product is used for household appliances, electric tools and various kinds of mobile appliances with rated ac voltage of 450/750v or less. (1) rated voltage Uo/U of YZ type is 300/500v, and YC type is 450/750v. (2) the wire core long-term allowed working temperature does not exceed 65 ℃. (3) w-type cable has weather resistance and certain oil resistance performance, which is suitable for use outdoors or in contact with oil pollution. (4) ZR cable has flame retardant performance.
4、6、8、9、12、14、16、19、21、24、28、30、33、37、42、44、48、52、56、61PTYY聚乙烯绝缘聚乙烯护套铁路信号电缆PTY22聚乙烯绝缘钢带铠装聚氯乙烯外护套铁路信号电缆敷设在土壤、槽、管中，能承受较大的机械外力PTY23聚乙烯绝缘钢带铠装聚乙烯外护。
EISC-SS阻燃本质安全电缆EISC-SS-R阻燃电缆（电线）（企业标准）本企业标准主要技术指标系参照IEC出版物及英国BS5308Part1标准资料编制。
用途：本产品识用于交流额定电压450/750V及以下，抗射频干扰及抗近场耦合能力较强的对本质安全要求的敷设场所；也适用于有瓦斯爆炸环境运作的工业部门的集散系统和本质安全电路信号传输等。
8h工作制是接触器的基本工作制，约定发热电流参数就是按8h工作制确定的；不间断工作制较8h工作制严酷得多，接触器的触头容易出现氧化而线圈容易出现过热。
在不间断工作制下，接触器需要降容使用；断续周期工作制的负载率则分别为标准值的15%、25%、40%和60%；短时工作制下触头的通电时间标准值分别为10min、30min、60min和90min等四种。
使用类别接触器有四种标准使用类别，分别是AC-AC-AC-3和AC-4。
煤矿用聚氯乙稀绝缘和护套阻燃控制电缆天津市电缆厂MKVVMKVV22MKVV32MKVVRMKVVRPMKVV（2-61芯）MKVV芯） MKVVR （2-61芯）MKVV芯） MKVVP （2-61芯）煤矿用阻燃屏蔽通信电缆MHYVP一、产品用途及特点本产品适用于矿山、井下环境监控系统中传输通信。
自承式电缆识别和长度标记：电缆外表面有**性识别标记，标记间隔不大于1m，标记内容有：导线直径，线对数量，电缆型号，制造厂厂名代号及制造年份，长度标记以间隔不大于1m标记在表面上HYAT通信电缆用途：主要用于传输音频、150kHZ及以下的模拟信号2048kbit/s及以下的数字信号。
5、工作参数：单线传输最大规格：1000m，加中继器可延长至10000m西门子PROFIBUS-DP总线电缆6XV1830-0EH10其它介绍：1．借助于其双屏蔽层，尤其适用于安装在易受电磁干扰的工业环境中2．通过总线终端的接地触点的外包层，可实现接地的连续性3．按米销售4．当连接各站时，应确保数据。
Armoured oil filled telecommunication cable USES: armoured communication cable mechanical protective layer can be appended to the structure of the cable, with the mechanical strength of the cable, antierosion capability, is vulnerable to mechanical and vulnerable to erosion area and design of telephone cable. Any kind of laying can be adopted, which is more suitable for direct buried laying in rock area.
产品型号、规格：型号标称截面(mm）芯数额定电压(V)执行标准：ZR-BV0.5-1851450/750及以下Q/X*ZR-BVR2.5-701450/750及以下ZR-RV0.5-951450/750及以下ZR-VV1.5-1851-5600/1000ZR-。
1、型号、名称、适用范围：型号名称适用范围ZR-kJYPV-ia(ZR-KJYPV22-ia)本安电路用聚乙稀绝缘铜丝编织对绞屏蔽(钢带铠装)聚氯乙稀护套控制电缆适用于发电厂、变电站、矿山和石化等场所。
从安全管理的角度看，信息不准、沟通不畅是个大问题。
从近年的事故分析，相互间缺乏沟通或许是近年基建工作频频出问题的通病。
因基建工作涉及工程管理部门、安监部门、运行维护部门和各种各样的作业队伍，这么多的部门、单位，若无组织无纪律，缺乏统一的协调和指挥，相互间缺乏横向沟通，或将出现难以弥补的漏洞，稍微不慎将引发悲剧，让作为安全管理的人员，不得不深思。
从近年的外包工程来看，出问题往往都是出在最基本的《安规》没有做到位。
TRVV柔性电缆RVVT、RVVTP耐弯曲电缆RVVPT电器装备用电缆-RVVTP电器装备用电缆RVVPT的详细介绍电器装备用电缆-RVVTP电器装备用电缆RVVPTTRVV柔性电缆RVVT、RVVTP耐弯曲电缆RVVPT的详细介绍TRVV柔性电缆RVVT、RVVTP耐弯曲电缆RVVPT型号：TRV。
Product introduction - mine control cable MKVV mine control cable MKVVR mine control cable shielding control cable MKVV32 MKVVP mining mine control cable MKVVRP mine shielding control cable for mine control cable MKVV22 mine flame-retardant control cable for mine monitoring control cable for mine cable type MKVV, MKVV22, MKVV32, MKVVR, MKVVP, MKVVRP 1, mine control cable standards and specifications: MT818-1999-2, flame-retardant control cable for mine purposes: This product is suitable for the control and monitoring circuit with rated ac voltage u0/u of 450/750v or below and the connecting line of the protection circuit and the electrical instrument in the distribution device. 3. Model specifications and scope of mine control cable products: Model specifications of the control cable for mining use: MKVV,MKVVP, mkvvvvvvvvvvp2-10mm2,2-61 cores are applicable to the weak current control system or mkvvvv22 of the strong electromagnetic field interference area. MKVV20 0.5-10mm2,4-61 core mkvvv32, mkvvvvv30 0.5-10mm2,7-61 core MKVVR 0.5-6mm2,2-61 core MKVRP 0.5-4mm2,2-61 core mkvvvvvvp22, mkvp2-221.5-10mm2, 4-22 core mkvp2, 1.5-10mm2 Is mainly used for 500 kv substation and power distribution device and strong electromagnetic interference zone MKVV - 1, MKVV22 0.5 was 10-1, 4, 2-61 core features: coal mine with control cable conductor long-term allowed working temperature is 70 ℃, the cable temperature under installation should not below 0 ℃. Permissible bending radius of control cables used in coal mines: for cables with armored or copper band shielding structures, the bending radius should not be less than 12 times of the outer diameter of the cables. For soft cable with shield layer structure, it should be no less than 6 times the outer diameter of the cable. The cable without armor layer should not be less than 6 times the outer diameter of the cable.