Fire retardant control cable model zr-kvvp22, zr-kvvvp2-22, zr-kvvvvp2, our company has been supplying for many years: 2. Zr-kvvp, zrc-kvvp, za-kvvp, zrb-kvvp, za-kvvrp, zc-kvvvrp, zrc-kvrp, zrc-kvrp, zrb-kvvvvvvvvp2, krkvp2-vrkp22 -KVVP32, etc. Control cables for mine flame retardant control cables: MKVV mkvvvvvvvvvvvvvvvvvv32 MKVVVRP: this product can be manufactured according to gb9330-88 electricity union IEC227(1979) and jcs258c-1986; The product is suitable for low voltage power supply, protection and measuring line of ac rated voltage 450/750v and 600/1000v and below. Especially suitable for power plants and substation control lines of 500KV or below. Use plastic insulation special shielding control cable can be external electricity, magnetic field.
The total shielding structure can adopt copper wire and copper band combination shielding, copper wire braid shielding, copper wire braid shielding, copper wire braid shielding, etc. The shielded cable of this structure can resist electromagnetic induction, poor grounding and power line, reduce inductance and prevent the induction electromotive force from being too large.
3：氟塑料高温补偿导线补偿电缆KX-GA-VVP聚氯乙烯绝缘和护套铜丝编织总屏蔽精密级K分度号热电偶用补偿电缆KX-GA-VVRP聚氯乙烯绝缘和护套铜丝编织总屏蔽精密级K分度号热电偶用补偿软电缆KX-GA-VPVP聚氯乙烯绝缘和护套铜丝编织分屏加总屏蔽精密级K分度号热电偶用补偿电缆KX-GA-。
天津市电缆总厂第一分厂专业供应销售CPEV-S通信电缆;CPEV-S电缆，来电咨询CPEV-S通信电缆;CPEV-S电缆的详细信息。
天津市电缆总厂第一分厂提供的CPEV-S通信电缆;CPEV-S电缆不仅具有国内外领先的技术水平，更有良好的售后服务和优质的解决方案。
HPVV型聚丙稀绝缘聚氯乙烯护套线的综合数据规格绝缘厚度mm绝缘外径mm护套厚度mm外形尺寸mm20℃时导体电阻最大值Ω/km下限上限HPVV2×±0.020.52.62.00×3.33.22.40×3.90148HPVV2×1/0.5。
人体直接或间接跟火线连通时会发生触电事故：直接站在地上接触火线（或与火线相连的导体），会发生触电事故；站在绝缘凳上一手扶墙，另一手接触火线会发生触电事故；站在绝缘凳上一手接处火线，另一手接触零线会发生触电事故。
***只要人体的一部分直接或间接接触火线，而另一部分不论是接触大地还是接触零线，都会发生触电事故。
下列情况下不会发生触电事故，但**不要尝试，以免误判火线与零线而发生意外。
直接站在地上接触零线；站在绝缘凳上只接触火线。
Propane burner plane with the flame of 750 ℃ and contact sample, sample in the compulsory blowing (5 m3 / min air emissions, wind speed 0.9 m/s), must be in vertical flame combustion is not up to 20 minutes, cable within 2.5 meters flame spread out on his own. IEC60332 is divided into A, B, C and D to evaluate the flame retardant performance.
b.周围环境温度：25℃c.土壤热阻系数：1.0K•m/Wd.直埋深度：0.7me.不同环境温度下载流量校正系数：环境温度（℃）校正系数940.88额定电压35KV及以下交联聚乙烯绝缘动力电缆①电缆导体的长期允许工作温度：≤90℃②。
MHYVP 2 * 3.3+2 * 0.85 data for mine shielded communication cable 1. Tin coated copper wire is used for conductor, 47/0.3 for conductor, 12/0.3 for 0.85, and 7/0.28 tin coated copper wire for drainage line. 2. Insulation color: 3.3 the wire core is a red one and a blue one, while the 0.85 wire core is a white one and a green one. The white wire core is wrapped with aluminum foil. 3. Insulation thickness: 3.3 core insulation thickness is 0.5, and the outside diameter after insulation is 3.5 mm. The insulation thickness of wire core is 0.7 and the outside diameter after insulation is 2.5mm. 4. Into line with the four wire core is arranged for red, green, blue, white, streamline, and row streamline to conductors are twisted together, don't put longitudinal, are not added when cabling filler, external use aluminum foil winding and cable core, then a layer of polyester film around the package, the outside is a layer of copper wire braided shielding (shielded copper wire tin plating). 5. Sheath: the front diameter is 8.2mm, the back diameter is 12mm (between 11.7mm and 12mm), and the sleeve is flame retardant blue
Steel tape armoured mainly as the radial mechanical protection layer of the cable, and it also have additional total shielding effect, especially steel tape armoured and copper wire, copper tape screened, is adopted two different shielding materials, play a complementary role in electromagnetic wave shielding, shielding effect will be better.
The cable is insulated by full-chromatograph solid polycondensation. The insulated wire is twisted into a pair of twisted wires. Suitable material of cable core is added to the cable core, and the plastic coated aluminum band shielding layer and the black outer expansion sleeve with the length mark in the counting order can be completed. Junction wire: solid annealed copper wire. Copper wire diameter is 0.32, 0.4, 0.6, 0.8 (mm).
执行标准：GB9330－1988和Q/SCT－J02.04－1999使用特性：电缆导体的最高额定温度为：聚氯乙烯绝缘电缆为70℃，交联聚乙烯绝缘电缆为90℃。
电缆敷设时的环境温度不低于0℃。
电缆敷设时的最弯曲半径为：无铠装层的电缆，应不小于电缆外径的6倍，有铠装层或铜带屏蔽的电缆应不小于电缆外径的12倍。
二是加强现场安全管理。
严格履行“两票”规定和安全技术交底规定，尤其是动火作业严格履行“动火工作票”规定，落实安全技术措施。
规范外包单位焊接、电工作业，在可能出现火灾的区域设置灭火器，对施工现场易燃易爆物品进行清理，划定易燃易爆危险品的存放区域，保持与明火作业面25m的防火间距。
三是加强外包作业人员尤其是特殊工种人员（焊工、电工）安全教育、安全交底和风险告知，提高不同单位、不同班组作业人员的安全意识，强化“互不伤害”意识。
低衰减、低噪音、微小型及搞稳相电缆等。
产品特点：1．可以传输较宽的频带2．对外界干扰的防卫度高3．天线效应小，辐射损耗小4．结构简单，安装便利，比较经济。
我们厂生产的射频电缆的衰减与导体，介质，结构尺寸，工艺水准和工作的频率都有关。
在传输过程中可以采用增加中继的方法对信号进行放大，最多可以加八个中继，也就是说理论上RS485的最大传输距离可以达到9.6公里。
如果真需要长距离传输，可以采用光纤为传播介质，收发两端各加一个光电转换器，多模光纤的传输距离是5~10公里，而采用单模光纤可达50公里的传播距离。