常被用于那些对传输的信号要求很高的场合。
4、产品使用范围：本产品适用于交流额定电压450/750V及以下的动力、日用电器、仪器、仪表、电讯设备，照明电路以及自动化装置的固定敷设，连接用软线，安装用软线以及干扰较强的场合用屏蔽电线。
Purpose of HYAT solid insulated filled cable: solid insulated filled cable is suitable for the urban telecommunication line of the local telecommunication network in the town of wuyu, and also for the special network line connecting to the public network. Mainly used for pipeline laying. The inner and outer surfaces of the cable core and the shield layer are filled with oil paste and poured to prevent water intrusion. The mechanical and electrical properties of the cable remain unchanged under conditions of 30~C - 60~C. Structure: wire: annealed bare copper wire, copper wire diameter 0. 32, 0. 40, 0. 50, 0. 60, 0. 70, 0. 80, 0. 90 (mm). Insulating material: high density polypropylene or polypropylene, colour of the insulated wire as indicated by full chromatograph. Pair of insulated wires: twist two different colored insulated wires into pairs at different pitch and use the specified chromatographic combination to identify pairs. Core structure: with 25 pairs as the basic unit, more than 25 pairs of cables are assembled according to the unit, each unit is wired with the unit of specified chromatogram to identify different units. 100 pairs of cables with more than one pair of cables plus 1% of the reserve pair, but not more than 6 pairs. The gap in the core is filled with oil paste. Core tape: wrap with a polygrease film tape. Shielding: metal strip with or without striping, which is longitudinal wrapped outside the core of the cable. Sheath: black low density polymer. Double sheathed cables can also be provided. Identification and marking: cable outer surface sexual identification mark, mark at no more than alternate 1 m intervals, tag contents are: the diameter of wire, line number, cable type, factory name and year of manufacture, marking at no more than alternate 1 m intervals to mark on the surface, but with the tag stagger. Other structures: according to the needs of users, we can provide armored cables HYAT53, HYAT55 and high frequency isolation cables YATG with strengthened mechanical protection layer.
In manufacuring HYA communication cable, mine cable, mine communication cable, mine, mine communication cable, signal cable, mining control cable, cable for mine monitoring, mine monitoring cable, mine remote sensing cable, control cable, computer cable, flame retardant cable, fire-resistant cable, communication cable in the city, railway signal cable, communications e such as the power cord, communication cable in the city the main products are: Manufacuring HYA, HYAT, HYAC HYA22 HYA23, HYAT23, HYA53, HYAT53, ZRC - manufacuring HYA, ZRC - HYAT, WDZ - manufacuring HYA, ZRC - HYA23 series, such as product model complete specifications, has passed the holding center communication e network access license, constant standard symbol system certification, sold throughout the country telecommunications company, also become several communications e accessories, agreement is well received by customers and trust!
Sheathed control cable is introduced: polyvinyl chloride insulated fine steel wire armoured or steel tape armoured polyvinyl chloride sheathed control cable for mine, for laying indoors, in cable trench, pipelines, and underground shaft, in the male by certain pulling force function and the function of external mechanical forces.
综合护套铁路信号电缆的理想屏蔽系数≤0.8；铝护套铁路信号电缆的理想屏蔽系数≤0.3铁路信号电缆PTYA23用途：适用于额定电压交流500V或直流1000V及以下传输铁路控制信号PTYAHPTYAPZYAPTYVPTY22PTY23(PZY02PZY03PZY23PZY22)或直流1000V及以下的。
一般认为，到20m处时，电流密度为零，电位也等于零即到达了电工技术中的零电位。
电流I在流过接地电阻Rx时产生的压降IRx，在流经Rc时同样产生压降IRc。
被测接地电阻Rx的值，可由电流互感器的变流比K以及电位器的电阻RS来确定，而与RC无关。
接地电阻表的使用1）拆开接地干线与接地体的连接点。
接地电阻表接线。
将仪表放平，检查检流计指针是否指在中心线上。
正确接线。
将倍率开关置于最大倍数上，缓慢摇动发电机手柄，转动“测量标度盘”，使检流计指针处于中心线位置上。
MHYV煤矿用聚乙烯绝缘聚氯乙烯护套通信电缆用于平巷、斜巷及机电硐室。
MHYAV煤矿用聚乙烯绝缘铝-聚乙烯粘结保护层绝缘聚氯乙烯护套通信电缆用于较潮湿的平巷和斜。
天津市电缆总厂第一分厂专业供应销售CPEV-S通信电缆;CPEV-S电缆，来电咨询CPEV-S通信电缆;CPEV-S电缆的详细信息。
电缆导体长期工作温度应不超过70℃。
普通护套的电缆在环境温度不低于-5℃下敷设，耐塞护套为-10℃。
弯曲半径不低于电缆外径的15倍（敷设时），且适用于任何水平差的干扰。
天津市电缆总厂第一分厂专业生产研发的市内通信电缆，电缆，大对数通信电缆，计算机电缆，通信设备电源线；铁路信号电缆，各种**性证书齐全，质量可靠。
100对及以上线对的电缆加有1％的预备线对，但最多不超过6对。
缆芯内的间隙用石油膏填充。
缆芯包带：用聚脂薄膜带绕包。
屏蔽：用轧纹(或不轧纹)金属带，金属带纵包于缆芯包带之外。
护套：黑色低密度聚乙烯。
也可提供双层护套的电缆。
Low smoke zero halogen cable code, name and meaning: project code meaning series code DLDWLDK low smoke low halogen low smoke zero halogen control cable insulation VJEF polyvinyl chloride crosslinked polyolefin thermoplastic sheath material VGS polyvinyl chloride thermosetting sheath thermoplastic sheath shielding materials PP2 copper mesh or tin plated copper mesh copper belt/plastics composites with fine steel wire armored material 2232 steel conductor type ABR koo body alone 7 strands of stranded conductor stranded conductor. Production area section (mm2) : 0.5, 1.0, 1.5, 2.5, 4, 6, 10, 16, 25.
接地引出线要求采用我镀锡编织铜线，和电缆铜带连接时应用铬铁锡焊，不宜用喷灯封焊，以免烧损绝缘。
③三相铜带屏蔽应分别与地线相连，注意屏蔽接地线和钢铠接地线应分别引出，相互绝缘，焊接地线的位置应尽量靠下。
对电缆端头和中间接头的基本要求：a.导体连接好；b.绝缘可靠，推荐采用辐照交联热收缩型硅橡胶绝缘材料；c.密封良好；d.足够的机械强度，能适应各种运行条件。
3、最低环境温度： ①阻燃聚氯乙烯绝缘和护套：固定敷设－40℃；非固定敷设－15℃； ②氟塑料绝缘和护套：固定敷设－60℃，非固定敷设－20℃。
4、电缆安装敷设温度应不低于0℃。
适用于交流额定电压0.6/1KV及以下的行车、台车、传输机械等移动电器用动力传输线及控制、照明、通讯线路，本产品已广泛应用于冶金、电力、船舶、港口等行业。
一般来说是三种信号，从dcs角度来说，一种是电气来的状态信号DI，一种是控制电气设备的控制信号DO，还有一种是频率信号AO，就是看具体的控制方案怎么去做了。
根据题意主要对象是电机，相对应的有泵，风机等。
想实现自动控制，不仅需要组态开关量还要组态模拟量，形成闭合控制回路。
其中开关量有开入量和开出量，模拟量有模入和模出量。
情况一，简单控制电机只需启停和监视它的运行情况，那么进入DCS的有开出量，模入量。
DJYP2V(R)P2聚乙烯绝缘铜带绕包分屏总屏聚氯乙烯护套计算机用屏蔽(软)电缆。
DJYV(R)P3聚乙烯绝缘铝塑复合带绕包总屏聚氯乙烯护套计算机用屏蔽(软)电缆。
DJYP3V(R)聚乙烯绝缘铝塑复合带绕包分屏聚氯乙烯护套计算机用屏蔽(软)电缆。
铠装通信电缆电气特性：电缆符合基本电缆的全部电气要求。
电缆长度：机械保护型电缆是根据相应基本电缆的标准长度制造。
HYA23铠装通信电缆;机械保护层可以加在任何电缆上，以增加电缆的机械强度，提高防侵蚀能力，是为易受机械破坏和及易受侵蚀而设计的通信电缆。
执行标准Q/CF006阻燃耐火特性试验执行GB标准使用特性1.交流额定电压：U0/U0.6/1KV最高工作温度：硅橡胶绝缘180℃，氟46绝缘有200℃和260℃两种，聚氯乙烯绝缘70℃，交联聚乙烯90℃。
（3）低卤低烟阻燃PVC绝缘和护套：70℃；无卤低烟阻燃绝缘和护套：90℃和125℃两种。
3.最低环境温度：（1）阻燃聚氯乙烯绝缘和护套：固定敷设-40℃；非固定敷设-15℃；（2）氟塑料绝缘和护套：固定敷设-60℃；非固定敷设-20℃；4.电缆安全敷设温度不应低于0℃。