电子计算机用屏蔽电缆，选用介电常数小的高压聚乙烯绝缘，采用对绞、对屏、总屏（或三线组绞合、组屏蔽、组屏总屏）等结构组成，具有介质损耗小、传输信号能力强、抗干扰性能好特点，能可靠地传输微弱的模拟信号或数字信号，可广泛地应用于发电、冶金、石油、化工、轻纺等部门的检测和控制用计算机系统或自动化装置，以及一。
聚乙稀绝缘综合护套钢带铠装聚氯乙烯护套铁路信号电缆PTYA23PTYA22PTY23PTY22PTYAH23PZYA23PZYA22PZY23PZY220.8mm（1/1.0MM）4-61芯适用于交流额定电压500V或直流电压1000V及以下传输音频信号及固定敷设的铁路信号和集团自动化装配的控制线路。
Low smoke halogen free cable All the value of the halogen ≦ 50 PPM (PREN 14582) according to regulations after low produce halide body content of < 100 parts per million (according to the regulations EN5067-2-1) halide produced by the body after low PH ≧ 4.3 after soluble in water, weak acid) (EN - 50267-2-2) according to regulations and hid products in an airtight container through a beam of light after the light transmittance ≧ 60% (according to regulations, EN - 50268-2) low Pb < 90 PPM, +, Hg, Cd, Cr6, PBBs, PBDEs are less than 5 PPM
Flame retardant cables and fireproof cables: the difference between the average person is very easy to confuse the concept of flame retardant cables and fireproof cables, although there are many more flame retardant cable applies to the advantages of chemical enterprise, such as low, low smoke, non-halogen, but in general, fire-resistant cable can replace flame retardant cable, and flame retardant cables can't take place of fire-resistant cable.
煤矿用聚氯乙稀绝缘和护套阻燃控制电缆天津市电缆厂MKVVMKVV22MKVV32MKVVRMKVVRPMKVV（2-61芯）MKVV芯） MKVVR （2-61芯）MKVV芯） MKVVP （2-61芯）煤矿用阻燃屏蔽通信电缆MHYVP一、产品用途及特点本产品适用于矿山、井下环境监控系统中传输通信。
校验用电流互感器精度：0.1S级。
误差0.1%，常用于校验计量级电流互感器的准确度。
计量用电流互感器精度：0.2S0.5级。
误差0.2%和0.5%，用于电费结算的依据，部分场合也会使用0.5级3.测量级电流互感器：0.5级、1.0级，2.0级等，一般用于电流表。
保护用电流互感器精度：10P10P5P5P20等，精度的含义：以10P10为例，即流过电流互感器的电流，是其额定电流的10倍以内的时候，电感器的误差在±10%以内。
适用于直埋敷设，具有抗挤压抗鼠疫啃噬等特性，其结构中的钢带铠装很好的保护了电缆内绝缘和内导体的安全。
天津市电缆总厂第一分厂专业供应销售CPEV-S通信电缆;CPEV-S电缆，来电咨询CPEV-S通信电缆;CPEV-S电缆的详细信息。
Mining flame-retardant communication cable on October 31, 2002 for coal mining products safety sign certificate, 2003-2005, expanded AnBiao product certification scope for many times, MHYAV, MHYA32, MHYV, MHY32, MHYVP, MKVV, MKVV22, MKVV32 and various types of products are got AnBiao certificate. Quansu power cables, control cables issued by the state production license, municipal cable information industry department
二、产品执行标准企业标准等效采用英国BS5308标准三、使用特性1.交流额定电压U0/U：300/500V2.电缆最高工作温度：聚乙烯绝缘70℃交联聚乙烯绝缘90℃无卤低烟阻燃聚烯烃70℃辐照交联型90℃和125℃两种3.最低环境温度：固定敷设-40℃；非固定敷设-15℃。
（2）在水平巷道或倾角45°以下的井巷内，应采用聚氯乙烯绝缘钢带或细钢丝铠装聚氯乙烯护套电力电缆、交联乙烯钢带或细钢丝铠装聚氯乙烯护套电力电缆。
（3）在进风斜井、井底车场及其附近、中央变电所至采区变电所之间，可以采用铝芯电缆；其他地点必须采用铜芯电缆。
Armoured communication cable armoring cable type: HYA53, HYAT53, HYA23 HYAT23, HYV22, HYA22 (rat, buried) armoring communication cable USES: armoured communication cable mechanical protective layer can be appended to the structure of the cable, with the mechanical strength of the cable, antierosion capability, is vulnerable to mechanical and designed and vulnerable to erosion area telephone cable. Any kind of laying can be adopted, which is more suitable for direct buried laying in rock area. Armored communication cable structure: 1. Basic cable: any filled and unfilled cable with single sheath or double sheath structure. 2. Armored communication cable mechanical protection layer: type 53 adopts 0.15mm thick corrugated steel belt, which is longitudinal wrapped on the basic cable and overlapped on both sides. The surface of the steel belt is coated with plastic to prevent corrosion and water intrusion. The type 23,22 has similar performance with double steel band wrapping. 3. Armored communication cable sheath: black high-molecular weight low-density polyurethane or polyurethane sheath. Sheath thickness may depend on the basic cable outer diameter. 5. The marking contents of armored communication cables include: wire diameter, number of wire pairs, cable model, length, manufacturer name and year of manufacture. 6. Armored communication cable electrical characteristics: the cable meets all the electrical requirements of the basic cable. 6. Cable length: mechanically protected cable is made according to the length of the corresponding basic cable
产品型号及名称ZR-DJYPV：聚乙烯绝缘铜丝编织分屏蔽聚氯乙烯护套阻燃型电子计算机用电缆ZR-DJYVP：聚乙烯绝缘铜丝编织总屏蔽聚氯乙烯护套阻燃型电子计算机用电缆ZR-DJYPVP：聚乙烯绝缘铜丝编织分屏蔽、总屏蔽聚氯乙烯护套阻燃型电子计算机用电缆ZR-DJYPVR：聚乙烯绝缘铜丝编织分屏蔽聚氯。
二极管从正向导通到截止有一个反向恢复过程在上图所示的硅二极管电路中加入一个如下图所示的输入电压。
在0―t1时间内，输入为+VF，二极管导通，电路中有电流流通。
设VD为二极管正向压降（硅管为0.7V左右），当VF远大于VD时，VD可略去不计，则在t1时，V1突然从+VF变为-VR。
在理想情况下，二极管将立刻转为截止，电路中应只有很小的反向电流。
但实际情况是，二极管并不立刻截止，而是先由正向的IF变到一个很大的反向电流IR=VR／RL，这个电流维持一段时间tS后才开始逐渐下降，再经过tt后，下降到一个很小的数值0.1IR，这时二极管才进人反向截止状态，如下图所示。
This process specification provides for rated voltage 450/750v, single core 1.5-500mm2 PVC insulated or polyolefin insulated flame-retardant fire resistant soft cable; And 0.6/1kv single core 4~500mm2, 2~5 cores 1.5~240mm2 polychlorinated insulated or polyolefin insulated flame-retardant fire resistant flexible cables process specifications, technical requirements, and acceptance rules. The main models of this process specification are: rated voltage 450/750v: za-rv; WDZA - RY, etc. Rated voltage 0.6/1kv: za-rvv, za-rvv22, wdza-ryy, wdza-ryy23, wdna-ryy, wdna-ryy23. 2? Usage characteristics, classification and nomenclature of cables 2.1? Service characteristics 2.1.1 cable rated operating voltage: 450/750v, 600/1000v. 2.1.3 temperature under installation should not below 0 ℃. 2.1.4 small bending radius of cables: unarmored cables: the flame retardant type is 6 times the outer diameter of cables, and the fire resistant type is 12 times the outer diameter of cables; The armored cable is 20 times the outer diameter of the cable. 2.2? The cable type consists of 5 parts: serial code, insulation, sheath material code, outer sheath and performance code.
阻燃通信电缆用途：主要用于传输音频、150kHZ及以下的模拟信号和2048kbit/s及以下的数字信号。
在一定条件下，也可用于传输2048kbit/s以上的数字信号。
适用于矿山、电厂、市内、近郊及局部地区。
2.2 电缆型式由系列代号、绝缘、护套材料代号、外护层和性能特征代号5个部分组成。
安防工程、监控工程、弱电系统工程、综合布线、银行监控工程、网络工程、消防工程、远程三表抄送、楼宇防盗监控、门禁可视对讲等专用音视频信号电线电缆。
例：铜芯0.6/1KV交联聚乙烯绝缘铜丝编织屏蔽，聚氯乙烯护套阻燃变频器用主回路电缆，3×185＋3×35mm2表示为：BPYJVP-0.6/1KV3×185＋3×35注：有关电缆的详细技术参数请向我公司垂询。