3. 绝缘厚度：3.3线芯绝缘厚度为0.5，绝缘后外径为3.5毫米。
0.85线芯绝缘厚度为0.7绝缘后外径为2.5毫米。
4. 成缆时把四根线芯排列为红，绿，蓝，白，排流线，排流线要和线芯一起绞合，千万不要纵放，成缆时不要加填充物，缆芯外用铝箔绕包，而后再绕包一层聚酯膜，在外有一层铜丝编织屏蔽（屏蔽铜丝不镀锡）。
At present, with the continuous development of kejiping, the flame retardant problem has gone from halogen flame retardant in the past to low halogen and non-halogen flame retardant. Companies in the development and production "of" communication power supply with the antiflaming fire-resistant flexible cable, the cable insulation and sheath using the low smoke zero halogen, high decomposition temperature and good mechanical properties of halogen-free, polymer materials, due to cable contains no halide and metal oxide, in does not produce harmful gases, and a lot of smoke, there is no cause the possibility of "secondary disasters", and it also has good mechanical properties and electrical properties, the operating re of cable, completely changed the deficiency of past flame retardant cable.
450/750 v polyvinyl chloride insulated control cable, applicable to dc and ac 50 hz, rated voltage 450/750 v power plants, power plants, factories, mines, ports and petrochemical enterprises such as long-distance control loop, as a connecting line between electrical instrumentation and automation instrumentation, phoresy all kinds of electric energy role, make the whole electric, reliable operation.
产品用途：MHYV：用于矿场作普通信号传输，适用于固定敷设；MHYVR：用于矿场作普通信号传输，可移动使用；MHYVP：用于电场干扰较大的场所作信号传输，适用于固定敷设；MHYVRP：用于电场干扰较大的场所作信号传输，电缆较柔软；MHY32：用于平巷，竖井或斜井作主信号传输。
绝缘1绝缘应采用符合规定的高密度聚乙烯。
2绝缘线芯采用颜色识别标志,绝缘颜色识别应均匀,并采用下列颜色:星绞:白、蓝、红、绿单元线组星绞组绝缘线芯按白、蓝、红、绿顺时针排列。
在四线组外扎一标识扎带，扎带颜色：红、绿、白。
即式中，Iset1为长延时过电流脱扣器的整定电流值，单位为A，K1为可靠系数取值为1.1，IN2为变压器低压侧的额定电流，单位为A。
长延时过电流脱扣器起到过负荷保护的作用。
2低压断路器短延时过电流脱扣器的整定电流一般情况下，低压断路器短延时过电流脱扣器的整定电流可以取值为3～5倍的低压断路器长延时过电流脱扣器的整定电流，其短延时时间可取0.2～0.4s。
即：式中，Iset2为短延时过电流脱扣器的整定电流。
（SYV视频电缆、RVVP屏蔽电缆、RVV护套电缆、AVVR信号电缆、SYV射频、）BV塑铜线、BVR塑铜软线、RVSP485双绞屏蔽电缆、RVS双绞线、RVB平行线、RV软线、KVVP控制屏蔽电缆、KVVR控制软电缆、KVV控制电缆、HYA通信电缆、VV电力电缆,RVVP屏蔽线（1～30芯）RVV。
当用于直流系统时，该系统的标称电压应不大于电缆额定电压的1．5倍。
注：系统的工作电压允许长时间地超过该系统标称电压的10%。
如果电缆的额定电压至少等于该系统的标称电压，则电缆可在高于额定电压10%的工作电压下使用。
HYAT23 armoured communication cable USES: armoured communication cable mechanical protective layer can be appended to the structure of the cable, with the mechanical strength of the cable, antierosion capability, is vulnerable to mechanical and vulnerable to erosion area and design of telephone cable. Any kind of laying can be adopted, which is more suitable for direct buried laying in rock area. Armored communication cable structure: 1. Basic cable: any filled and unfilled cable with single sheath or double sheath structure. ? 2. Armored communication cable mechanical protection layer: type 53 adopts 0.15mm thick corrugated steel belt, which is longitudinal wrapped on the basic cable and overlapped on both sides. The surface of the steel belt is coated with plastic to prevent corrosion and water intrusion. The type 23,22 has similar performance with double steel band wrapping. 3. Armored communication cable sheath: black high-molecular weight low-density polyurethane or polyurethane sheath. Sheath thickness may depend on the basic cable outer diameter.
20年后，电路设计一般是：进户线6—10mm2，照明2.5mm2，插座4mm2，空调6mm2专线。
单芯电线1.5平方电线，用于灯具照明，单芯电线2.5平方电线，用于插座。
单芯电线4平方电线用于3匹空调以上，单芯电线6平方电线用于总进线，双色线用于接地线。
In flame retardant series products, has been successfully used in the oxygen isolation technology, not only 0.6/1 kv polyvinyl chloride insulated and crosslinked polyethylene insulation flame retardant power cable can achieve GB/T12666.5 "into A bunch of power cable test" in class A, and rated voltage up to and including 6/10 kv 6/10 kv crosslinked poly (flame retardant power cable can reach A high class A demand and A large margin. On the basis of high flame retardant and high flame retardant cross-linked insulation, a low-smoke halogen-free high-flame retardant oxygen insulation layer power cable was added, and its low-smoke halogen-free performance was in line with GB/T17651.1.2 and GB/ t In this way, the overall level of the company's cross-linked power cable is lower than the domestic status.
ZR-BPGGPP2硅橡胶绝缘和护套铜丝编织铜带绕包屏蔽耐高温变频电力电缆。
ZR-BPGGP3硅橡胶绝缘和护套铝聚酯复合膜绕包屏蔽耐高温变频电力电缆。
ZR-BPGVFP硅橡胶绝缘丁腈护套铜丝编织屏蔽耐高温变频电力电缆。
READ_VAR,WRITER_VAR，才是我们要真正使用的，它的作用就是写入和读取变量，看程序图六CFC编写的MODBUS通信程序如图六所示，是程序的全貌，程序实在太大了，大家可能要费点眼神了，黄色荧光笔部分是程序的启动按钮，当变量Com_En产生一个上升沿时，程序就会自动执行。
最后面红色大圆圈就是我们需要的结果。
读取或写入的数据是放在数组里的，当你交互的数据是连续的时候，就很方便了。
其实，CFC的精髓就是可以自由移动，就像电路图一样，像通讯程序中，由于前后功能块需要联系，我们就需要中间变量来传递，而直接使用连线，省去了建立中间变量的麻烦。
交联本安电缆、交联信号电缆等：销售热线； ；KJYYVRP；KJYYVRPL；KYJV、KYJVR、KYJVP、KYJVRP、KYJVP2、KYJVRP2、KYJVP1、KYJVRP1、KYJV22、KYJVP22、KYJV22P、KYJV22P2、KYJVP2-22、KYJVRP22、KYJVP。
控制电缆包括kvv电缆，kvvr电缆，zrkvv电缆，zrkvvp电缆，kvvp电缆，kvvrp电缆，kvvp2电缆，kvvp2－22电缆，nhkvv电缆，zrkvvrp电缆，kvv22电缆，zrkvv22电缆。
当用于直流系统时，该系统的标称电压应不大于电缆额定电压的1．5倍。
注：系统的工作电压允许长时间地超过该系统标称电压的10%。
如果电缆的额定电压至少等于该系统的标称电压，则电缆可在高于额定电压10%的工作电压下使用。
矿用控制电缆电气性能：1、额定电压450/750v2、电缆导体的长度允许工作温度为70摄氏度3、电缆的敷设温度应不低于0摄氏度，推荐的允许弯曲半径；4、无铠装层的电缆，应不小于电缆外径的6倍5、有铠装或铜带屏蔽结构的电缆，应不小于电缆外径的12倍。